1. How to choose the type of the cleanroom wiper
a. Weight: The higher the weight ,the better.
b. Quality: the microfiber is better than the polyester cleanroom wiper.
c. Softness: The softer, the better.
d. Wear resistance: Strong wear resistance, not easy to release fiber.
2.The Edge sealing of the cleanroom wiper
There are several seal edges of clean room wiper: cold cutting, laser cutting, Ultrasonic sealing, Heat-sealed edge .Different seal edges are applied to different purposes.
a. Laser cutting: Using laser sealing, four edges are not yellow, no-easy fiber off, non-deformable. It is more suitable for high-grade clean room. This way of cutting in the market now is mostly sealed by laser.
b. Ultrasonic sealing: The edge is smooth, reliable, accurate trimming, no deformation, no fluff and so on. The edge is easy to tear off after cleaning.
c. Heat-sealed edge: No easy to chip off, the edge is easy to tear off after cleaning.
d. Cold cutting: easy to chip off.
3. The testing of cleanroom wiper
1.Testing report.
2.Ion content: within the range of test standards.
3.Water absorption: conform to the requirement of the products.
4.Dust content: Low dust content.
CLICK HERE to choose what you need
English 
français
Deutsch
русский
italiano
Nederlands
العربية
日本語
한국의
Tiếng Việt
IPv6 network supported
